Our Products

contact us

 NOTE;  The information contained herein is subject to change without notice. 

 INCH

Molded component  do not require a metal sleeve. 

 Just slip it into the TSM       position it in the shaft       and lock it in place       It's that simple 

 

 Part       

Number

B

+.001   

-.000

D

+.000   

-.001

Component   

Thickness

 A        
 C      
 E      
 H      
Max.  Torque       in/lb
Stock    

Price     

$

55003
.125
.250

 
 
 
 

 
 
55005
.250
.375
.05-.12
.40
.15
.50
.28
50

 in stock    

7.50
55007
.375
.500

.60
.15
.75
.46
100
in stock
7.65
55009
.500
.625

.71
.20
.94
.57

in stock
8.25











55031
.125
.250
.13-.25
.40
.09
.37
.20
20
in stock
7.50
55033
.250
.375

.40
.10
.50
.22
50
in stock
7.50
55035
.375
.500

.40
.10
.69
.22
100
in stock
8.25
55037
.500
.625

.40
.10
.75
.22




 PATENTED

MATERIAL:  Stainless steel 303 

 TORQUE VALUE IS BASED ON MOUNTING METAL COMPONENTS. 

FOR PLASTIC COMPONENTS THE VALUE WILL BE APPROX. 50% LESS.

Asymmetric Fasteners Inc.  New sleeve technology for mounting pulleys, gears or sprockets onto a keyless shaft.

HOW IT WORKS

 This simple two-piece fasteners consists of a slotted sleeve and a nut.  As the nut is tightened against  a component (gear, pulley, etc), an axial force clamps the component against the sleeve's hex head while a simultaneous radial force clamps the slotted sleeve into the shaft. The concave configuration of the sleeve's hex head makes a dent (depression) in the component securing the component in place.            .

This simple design is very easy to install and remove.  Since it has no set screw it can be adjusted and reused many times without damaging shaft.

 NOTE:  OTHER SIZES AND MATERIAL AVAILABLE ON REQUEST.

 Call us  908-684-4025

 The concave configuration of the sleeves head makes a dent (compression) in the component securing the component in place

 Torksleeve M

Torksleeve M (TSM)  mounting keyless plastic or metal pulleys, gears on  shaft

 TSM

 Torksleeve M