call us 908-684-4025
Material: stainless steel 303
SLEEVE MOUNTING PULLEYS/GEARS ON KEYLESS SHAFT
Torksleeve A TSA and TSA 3 Series delivers a zero-backlash frictional connection that will accommodate high-torque and thrust, loads. Their shallow, asymmetric thread design maintains excellent concentricity.
All AFI locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut or a series of annular screws to engage inner and outer sleeves with mating asymmetric threads. The resulting wedge action creates a radial force on the sleeves, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.
| W || L |
|3M 10111 ||4||8||11.4||18.6|
|3M 10112||6||10||20.5||11.4||18.6||12.4|| 107 ||23.00|
|3M 10113||8||.12||16||25|| |
With all three pieces installed onto a shaft, turn the set screws in sequence.
This causes the outer sleeve to expand, gripping the component, and the
inner sleeve to contract, gripping the shaft.
Other sizes and material available on request.
Dimension W can be made to fit client component thickness.
The infermation contained herein is subject to change without notice.
| W || L |